63 Steering Columns: Installation
Tilt Steering Column Installation
INSTALLING THE CANCELING CAM (KEY COLUMN)
CANCELING CAM
SPRING
3/16” SPACER
STEERING WHEEL
RETAINING NUT
5/8” SPACER
1. Install the large
5/8”aluminum spacer over
the column shaft.
2. Next install the Canceling
Cam Spring over the column
shaft and down to the 5/8”
aluminum spacer.
3. Then, slide the Canceling
Cam over the column shaft
and canceling cam spring.
For proper operation of the
canceling cam, align the
canceling cam stem between
the 10 and 11 o’clock position.
(figure A )
4. Place the final 3/16”
aluminum spacer over the
column shaft and down to the
canceling cam.
5. When installing your
steering wheel adapter,
tighten the retaining nut to 50
ft lbs.
IMPORTANT: (FOR KEY AND NON-KEY COLUMNS)
A spring-loaded horn contact connects to the underside of the cancelling
cam. When connecting the cancelling cam to your horn button, please note
that the black wire is only designed for momentary ground to trigger a horn
relay. Do not connect voltage to the black wire, or permanent damage to
the column wiring or other components will occur and void column
warranty.