Billet-Power Rear Steer/Front Steer Rack and Pinion
148
Front Steer Power Rack & Pinion
Rack and Pinion: Billet-Power Rear Steer & Front Steer Rack and Pinions
The Billet-Power® Rear Steer Rack & Pinion is made of all new components, including the valve
and piston, and is designed to fit any classic rear steer vehicle (mounts behind the spindle). Billet
mounting “pillow blocks” allow for universal mounting and the pinion shaft rotates to align with your
vehicle’s steering shafting. Billet finned housing provides heat reduction. Each system includes a new
Power Rack and Pinion, Pump with aluminum pulley (V-Belt or Serpentine) and fittings for connecting
hoses to the hose kit of your choice. Hoses, U-Joint, and Reservoir are not included.
• All new components – Including valve, piston, seals, bearings and bushings, and pinion and rack
gears
• Stronger rack shaft – almost 1 inch diameter
• More than 6 inches of travel for full turning radius
• Sleek, attractive powder coated design
• Universal, precision 6061 Aluminum, billet
mounting
• Lifetime Serviceability
Part No. Description
FR40020 45” Rear Steer Power Rack
FR40020-V 45” Rear Steer Power Rack - with P/S Pump
and V-Belt Pulley
FR40020-S 45” Rear Steer Power Rack - with P/S Pump
and Serpentine Belt Pulley
FR40031 41.69” Rear Steer Power Rack
FR40031-V 41.69” Rear Steer Power Rack -
with P/S Pump and V-Belt Pulley
FR40031-S 41.69” Rear Steer Power Rack -
with P/S Pump and Serpentine Belt Pulley
Dimensionally interchangeable with the Mustang
or Omni Racks—with new mounting versatility!
Precision-machined billet aluminum mounts
retrofit to virtually any vehicle application and
feature an adjustable pinion to improve universal
joint angle. The Universal Mount Power Rack and
Pinion is pressure and fluid tested after assembly
to ensure maximum quality and performance.
Each Flaming River Power Rack comes with
Lifetime Serviceability and is made in the US
• All New Components – Including valve, piston, seals,
bearings and bushings, and pinion and rack gears
• Stronger Rack Shaft – Almost 1 inch diameter
• More than 6” of travel for improved turning radius
• Braided stainless pressure lines for low profile design
and added clearance
• Finned Valve acts as a heat sink for lower fluid
temperatures
• Billet Pillow Blocks - Allow for adjustable pinion angle
• Racks available in 45” and 41.69” overall lengths -
Custom designs also available
• Lifetime Serviceability
Part No. Description
FR40022 Front Steer Universal Power Rack -
Blue Rack Housing
FR40022PLN Front Steer Universal Power Rack -
Standard Cast Rack Housing
FR40022XX Custom Steer Universal Power Rack -
Standard Cast Rack Housing
FR40022-V Front Steer Universal Power Rack -
with P/S Pump and V-Belt Pulley
FR40022-S Front Steer Universal Power Rack -
with P/S Pump and Serpentine Belt Pulley
®
®