The Little Switch (Batery Disconnect)
Alternators, Battery Disconnect Switches, Electrical Accessories
FR1002 The Little Switch
FR1002-1 The Little Switch (No Mounting Bracket)
The Little Switch is rated at 100 amps continuous service and 500
amps for 10 second surges making it ideal for street rods, classics and
passenger cars. In addition to preventing battery drain, this unique
switch is also a cost effective anti-theft device. A rubber boot seals the
neck from moisture and dirt.
• Competition approved by IMSA, ARCA, and SCCA.
• Inexpensive Anti-theft Device
• Prevents Battery Drain
• Water Resistant
• Removable Key
Mounting Bracket Included Yes
Mounting Bracket Part No. FR1004
Protective Cover Included Yes - Protective Rubber Boot
Protective Cover Part No. FR1002BT
Approved for IMSA, ARCA and SCCA Competition Use
8 7 6 5 4 3 2 1
2.50"
5.58"
2X .28"
1.50"
3.00" .50" 1.50"
D
C
B
A
Part No. FR1002
Warranty 1 Year
Voltage 6V/12V/24V
Max Continuous Current 100 Amps
Max Surge Current 500 Amps (10 seconds)
Environmental Protection Rating IP4X
Operating Temperature Range -40°C to +50°C, -40°F to +122°F
D
Contact Terminals Copper
Contact Hardware Zinc Plated Steel
Stud Diameter M8
Available Stud Length 0.50”
C
Max Tightening Torque 4.43 ft·lbs / 6 N·m
LED ON/OFF Indicator No
Lock-Out Capability Yes – Removable Key
B
Replacement Key Part No. FR1002K
FR1050 Dual Batery Disconnect Switch
The Dual Battery Disconnect Switch allows A
for
two batteries to operate independent of one
another, or for both to be in the ON or OFF
position at the same time.
• Rated at 300 Amps continuous service,
and 1000 Amps for 5 second surges.
• 12 or 24 Volts
• IP 54 Rating
• 300 Amps Continuous
• 1000 Amps Surge for 5 Seconds
• Silver Plated Contacts
PART NO.
FR1002
= KEY CHARACTERISTIC IDENTIFIER
THIS DOCUMENT AND THE INFORMATION CONTAINED THEREIN IS THE PROPERTY
OF FLAMING RIVER INDUSTRIES AND IS ISSUED IN CONFIDENCE FOR THE
PURPOSE OF AIDING THE TRANSACTION OF BUSINESS BETWEEN FLAMING RIVER
INDUSTRIES AND RECIPIENT. DOCUMENT AND SPECIFICATIONS ARE NOT TO BE
DISCLOSED TO OTHERS, REPRODUCED IN PART OR WHOLE, OR USED FOR
MANUFACTURE FOR OTHERS. DELIVERY OF THIS DOCUMENT BY FLAMING RIVER
INDUSTRIES CONVEYS NO PROPERTY RIGHTS THEREIN NOR IN ANY MATTER
DISCLOSED THEREIN.
FLAMING RIVER INDUSTRIES
DESCRIPTION
DWG. NO.
SCALE:
800 POERTNER DRIVE
BEREA, OHIO
44017
SWITCH, KILL BATTERY 100amp (LITLE SWITCH)
SIZE
B
SHEET 3 OF 3
ANSI/ASME Y14.5M-1994
UNLESS OTHERWISE SPECIFIED
ALL DIMENSIONS ARE IN INCHES
NO SHARP EDGES OR BURRS ALLOWED
TOLERANCES:
DECIMALS:_______ .X=±.1
.XX=±.01
.XXX=±.005
FRACTIONS:__________±1/64
ANGLES:_____________±1°
UNLESS OTHERWISE SPECIFIED
MATERIAL:
PRODUCT CLASS:
MAKE/BUY:
DRAWN BY:
DATE:
FINISH: DO NOT SCALE DRAWING
FR1002
1:2
REV C/N NO. REVISION DATE BY CK. ENG. ENG.
8 7 6 5 4 3 2 1
2.64”
2.64” 3.00”
Description Dual Battery Disconnect Switch
Part No. FR1050
Warranty 1 Year
Voltage 12V and 24V
Max Continuous Current 300 Amps
Max Surge Current 1,000 Amps (5 seconds)
Environmental Protection Rating IP54
Operating Temperature Range -40°C to +50°C -40°F to +122°F
Internal Contacts: Silver Plated Copper
Contact Terminals Copper
Contact Hardware Brass
Stud Diameter M10 Available
Stud Length 0.5” (1/2 in)
Tightening Torque 11-13 ft·lbs
Switch Modes 4 Modes: #1 On, #2 On, Both On, Both Off
Visit our website at www.flamingriver.com 174
/www.flamingriver.com