Alternators, Battery Disconnect Switches, Electrical Accessories
180
FR1003-4 The Big Switch with Extension Kit
FR1003-EXT Extension Only
This industrial lever kit allows for remote mounting of
the Big Switch. Kit includes a custom 15” aluminum rod,
handle, and the switch.
• Rated at 250 amps continuous service (12/16/24V) and
2500 amps for 5 second surges.
• Spring-loaded, vibration resistant waterproof design.
• Accepted by most sanctioning bodies including IHRA/
NHRA.
• Furnished with an easy-grip T-handle, anodized
aluminum bracket and zinc plated mounting hardware.
FR1003-2 The Big Switch with Lever Kit
The lever kit allows for remote actuation of
the Big Switch. The kit includes an 18" long,
aluminum threaded rod, T-handle, mounting
bracket and necessary hardware. A "push
off" decal is included. Accepted for NHRA/
IHRA competition use.
FR1006 Lever Kit Only
Note: Terminals on battery disconect
switches are live parts of the electrical
system and should be treated just
like battery terminals. Covers are
recommended, but not included,
for each kit. Contact your vehicle’s
manufacturer to determine proper
placement and suitability.
FR1048 - 500 AMP
Big Switch 500 - With Mounting Bracket
Flaming River now offers an alternative to the FR1003 switch for
racing. Rated at 500 amps continuous service (12/16/24V) and
2500 amps for 5 second surges, this switch also has the added
benefit of weight savings over the FR1003 switch:
FR1003 22.4 oz. • FR1048 19.2 oz
Spring-loaded, vibration resistant, waterproof design. Accepted by
most sanctioning bodies including IHRA/NHRA. Furnished with an
easy-grip T-handle, anodized aluminum bracket and zinc plated
mounting hardware.
FR1070 BA Professional Jumper Cable
The Professional Jumper Cables are heavyduty,
23 feet long, and ultra-flexible. Robust
brass clamps designed to hold firm and thick,
yet flexible cables safely allow you to jumpstart
your vehicle. The set comes with one black and
one red cable with clamps. Conveniently stores
in a rugged carrying case.
Strong Brass Jaw Clamps with
Copper Connection for
Maximum Continuous Current
• Nominal Voltage 12V/24V
• Clamps Material: casting brass
• Cable Material: copper (cross section 50 mm2)
• Cable Insulation: highly flexible PVC
• Max Current Carrying Capacity: 1000 A for 30s
• Short-term Current Capacity: 2000 A for 5s