$299.99 dz.
$323.99 dz.
+ Easton® FMJ™ T-64 Arrow Shaft 2070827 ▲
+ Easton® FMJ™ T-64 MTO Arrows* 2070832 ▲
*MTO Includes Fletching and Factory Included Components. See Page 97 for Additional MTO Options.
• Proven FMJ Technology is Combined with a Rear Bias Taper that Creates a Reduced Friction Path for Lethal Results in the Field
• Shaft Profile Starts at the Front with a 6 mm Diameter that Tapers Seamlessly Down to a Micro Diameter 4 mm at the Nock End
• This Design Builds in 30% More F.O.C. without Adding Point Weight, for Best in Class Long-Range Accuracy
• 2 Different Deflection Factors that will Cover All Spines from 400-300
• Deflection Factor 7.9 (310 Spine); Deflection Factor 9.5 (375 Spine)
• Cutting from the Front End of the Shaft will Weaken the Spine, (Max Cut Line is Laser Etched on Front of Shaft)
• Cutting from the Nock End of the Shaft will Stiffen the Spine (No Cut Limit from Back)
• RPS Insert with Standard 8-32 Point and Broadhead Compatibility
• Utilizes .166” Nocks; will Accept a .166” Lighted Nock
T-64 COMPONENTS
+ Easton® HP™ Brass Insert
• Adjustable Weight: 50 gr. or 75 gr.
• Accepts 9/32 Screw-In Points
• Increases Arrow Weight and F.O.C.
2070476 ▲
$19.99 dz.
+ Easton® ST RPS Insert
• Weight: 19 gr.; 8/32 Thread
• Accepts 8/32 Screw-In Points
2070228 ▲
$6.99 dz.
+ Easton® 4MM Microlite™ Nock
• Precision Molded, Press-Fit
• Fits .166” UNI Bushing; Weight: 6 gr.
• Available Colors:
Blue
Lemon Lime
Deep Red
Orange
Emerald Green
$8.99 dz.
4MM COMPONENTS
+ Easton® 4MM Titanium Half-Out
• Titanium Half Out Insert for 4 mm Shafts
• Designed to Fit .166” ID Shafts; 55 grains
• Super Durable Insert that Gives You a Higher F.O.C.
• Sold in a Pack of 6
2070807 ▲
$42.99 pk.
+ Easton® 4MM Aluminum
Half-Out
• Fits Easton 4 mm Hunting Shafts
• Precision Machined from Aircraft Grade Aluminum
• Precise Two-Point Interface with Shaft Increases Strength
• Spine Specific Construction Allows for Tightest Tolerence
Between Components
• Non-Reflective Black Anodized Finish
• Weight: 50 grains
• Available Sizes:
#1, #2, #3, #4, #5
2070887 ▲
+ Easton® 4MM (G) Deep Six™
Steel HIT Insert
• Fits 4MM Shafts
• Weight: 20 gr.
• Will Not Work with 8-32 Conventional Thread
• Includes Chamfer Stone, Installation Tool, and Epoxy
2070417 ▲
+ Easton® 4MM Microlite™ Nock
• Precision Molded, Press-Fit
• Fits .166” UNI Bushing; Weight: 6 gr.
• Available Colors:
Blue
Lemon Lime
Deep Red
Orange
Emerald Green
2070543 ▲
2070543 ▲
Size Shaft Weight
GPI Avg.
Spine
Deflection Factor Inches 85/100/125 gr.
7.9 13.3 DF 7.9 32 5/16
9.5 12.2 DF 9.5 30 5/16
+ Easton® Deep Six™ Steel Field Point
• Fits All Injexion, FMJ, AXIS Arrows
• Deep Six Inserts Required
• Weight: 100 gr.
• 6/40 Thread
2070816
+ Easton® 4MM FMJ™ Match Grade Arrow Shafts 2070911 ▲
+ Easton® 4MM FMJ™ Match Grade Fletched Arrows 2070910 ▲
+ Easton® 4MM FMJ™ Match Grade MTO Arrows* 2070920 ▲
+ Easton® 4MM FMJ™ Arrow Shafts 2070912 ▲
+ Easton® 4MM FMJ™ Fletched Arrows 2070909 ▲
+ Easton® 4MM FMJ™ MTO Arrows* 2070921 ▲
*MTO Includes Fletching and Factory Included Components. See Page 97 for Additional MTO Options.
• 4mm Micro-Diameter Carbon Core with 7075 Alloy Metal Jacket
• Pre-Installed 4mm Microlite™ Nocks (6 gr.)
• 8/32 4MM Aluminum Half-Out Inserts (50 gr.)
Size Shaft Weight
Spine @28" Span
GPI
Deflection Inches
Included for Optimum FOC for Hunting
• Easy Target Pull
• Available Shafts:
4MM FMJ Match Grade: Straightness: ±001”
4MM FMJ: Straightness ±.002”
• Fletched Arrows are Fletched with Bohning Blazer Vanes
Stock Length
Inches
+ Easton® 4MM Axis™ Long Range Match Grade
Arrow Shafts 2070891 ▲
+ Easton® 4MM Axis™ Long Range Match Grade
Fletched Arrows 2070892 ▲
+ Easton® 4MM Axis™ Long Range Match Grade
MTO Arrows* 2070922 ▲
+ Easton® 4MM Axis™ Long Range Arrow Shafts 2070906 ▲
+ Easton® 4MM Axis™ Long Range Fletched Arrows 2070907 ▲
+ Easton® 4MM Axis™ Long Range MTO Arrows* 2070923 ▲
*MTO Includes Fletching and Factory Included Components. See Page 97 for Additional MTO Options.
• 4mm Micro-Diameter Uniform ACU-Carbon Fiber Construction
• Pre-Installed 4MM Microlite Nocks
• 8/32 4MM Aluminum Half Outs are Included for Optimum FOC
• Available Shafts:
Long Range Match Grade: Straightness: ±001”
Long Range: Straightness: .003”
$229.99 dz.
$159.99 6/pk.
$253.99 dz.
$199.99 dz.
$129.99 6/pk.
$223.99 dz.
Deep Six
Field Point
O.D.
Inches
4MM
Halfout
400 9.8 0.400 31.5 DP6-5 0.234 #2
340 11.0 0.340 32 DP6-5 0.240 #3
300 11.7 0.300 32.5 DP6-6 0.244 #4
250 12.3 0.250 33 DP6-6 0.247 #5
Size Shaft Weight
GPI
Spine @28" Span
Deflection Inches
Stock Length
Inches
Deep Six
Field Point
O.D.
Inches
4MM
Halfout
250 9.8 0.250 33 DP6-6 0.244 #4
300 9.3 0.300 32.5 DP6-6 0.241 #4
340 8.3 0.340 32 DP6-4 0.234 #2
400 7.4 0.400 31.5 DP6-4 0.229 #1
+ Easton® 4MM AC ProComp Hunter Shaft 2070861 ▲
+ Easton® 4MM AC ProComp Hunter MTO Arrows* 2070883 ▲
*MTO Includes Fletching and Factory Included Components. See Page 97 for Additional MTO Options.
• 4MM Ultra-Micro Diameter Aluminum Core with Carbon Overlay
• Straightness ± .0015”
Size Shaft Weight
Spine @28" Span
GPI
Deflection Inches
• Includes:
4mm .166” Nocks
8-32 Aluminum Halfouts (35 gr.)
Stock Length
Inches RPS Point O.D.
Inches
4MM
Halfout
250 10.8 0.250 34 5/16 0.245 #4
300 9.5 0.300 33.63 5/16 0.236 #2
340 8.9 0.340 33.63 5/16 0.231 #1
380 8.3 0.380 32.62 5/16 0.227 #1
$16.99 dz.
$264.99 dz.
$288.99 dz.
$19.99 dz.
$184.99 dz.
$109.99 6/pk.
$208.99 dz.
$155.99 dz.
$94.99 6/pk.
$179.99 dz.
$7.99 dz.
$8.99 dz.
800-829-7408
BOWS, ARROWS, VANES & COMPONENTS
EASTON AC / CARBON HUNTING ARROWS
▲ WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov 57
/?q=2070827
/?q=2070832
/?q=2070417
/?q=2070228
/?q=2070476
/?q=2070887
/?q=2070543
/?q=2070543
/?q=2070816
/?q=2070807
/?q=2070891
/?q=2070892
/?q=2070922
/?q=2070906
/?q=2070907
/?q=2070923
/?q=2070911
/?q=2070910
/?q=2070920
/?q=2070912
/?q=2070909
/?q=2070921
/?q=2070861
/?q=2070883
/www.P65Warnings.ca.gov