+Match Point Archery ProStops CLS (Elite)
• ProStops CLS; Compression Limb Stops Provide a Hard, Solid Wall for Elite Bows
• Designed to Provide the Hardest Cable Stopping Ability of Any Draw Stop on the Market
• Precision Machined from 6082 Aluminum Alloy
• Installs Single-Handedly in Seconds
• Laser Engraved with Anodized Finish
• Sold as a Pair
• Diameter: 12 mm
• Color May Vary Depending on Manufacturer Availability
8790006
$45.99 pr.
+Match Point Archery ProStops HCS (BowTech)
• ProStops HCS; Hard Cable Stops Provide a Hard, Solid Wall on BowTech 2 Cam Bows
• Designed to Provide the Hardest Cable Stopping Ability of Any Draw Stop on the Market
• Precision Machined from 6082 Aluminum Alloy
• Installs Single-Handedly in Seconds
• Laser Engraved with Anodized Finish
• Sold as a Pair
• Color May Vary Depending on Manufacturer Availability
• Available Sizes: 6 mm, 8 mm, 10 mm
8790005
$39.99 pr.
+Match Point Archery ProStops HCS (Hoyt DFX)
• ProStops HCS; Hard Cable Stops Provide a Hard, Solid Wall for Hoyt DFX Bows
• Designed to Provide the Hardest Cable Stopping Ability of Any Draw Stop on the Market
• Precision Machined from 6082 Aluminum Alloy
• Installs Single-Handedly in Seconds
• Laser Engraved with Anodized Finish
• Diameter: 8 mm
• Sold as a Pair
• Color May Vary Depending on Manufacturer Availability
8790007
$39.99 pr.
+Match Point Archery ProStops HCS (Hoyt ZT)
• ProStops HCS; Hard Cable Stops Provide a Hard, Solid Wall for Hoyt Bows with ZT Cam
• Designed to Provide the Hardest Cable Stopping Ability of Any Draw Stop on the Market
• Precision Machined from 6082 Aluminum Alloy
• Easy to Install
• Anodized Aluminum Finish
• Sold as a Pair for the Top and Bottom Cam
• Available in 8 mm and 10 mm
• Color May Vary Depending on Manufacturer Availability
8790008
$54.99 ea.
+Match Point Archery Hoyt® Draw Stops
• 2 Cam Draw Stop
• Aluminum Construction
• Available in 6 mm or 8 mm
• Color May Vary Depending on Manufacturer Availability
8790004
$19.99 ea.
+Match Point Archery PSE® Draw Stops
• Used by PSE Shooters Dietmar Trillus, and Scott Starnes
• Aluminum Construction
• Available in 8 mm or 9 mm
• 9 mm will Increase Holding Weight by 2 lbs.
• Color May Vary Depending on Manufacturer Availability
8790002 (2 Cam)
8790003 (1 Cam)
8 mm
10 mm
2 Cam 1 Cam
+Bomar Bowtech Reckoning Deadlock Draw Stops
• Designed Specifically for the Bowtech Reckoning DeadLock Cam
• Creates a Solid Back Wall
• Eliminates the "Spongy" Feel
• Great for Archers Using Back Tension Releases
1500017
$25.49 ea.
+Bomar Prime TRM Draw Stops
• Designed for Use on the Prime TRM Cam Available
on the Logic, CT3, CT5, and CT9
• Creates a Solid Back Wall without Using the Limb Stop Feature
• Eliminates the "Spongy" Feel
• Great for Archers Using Back Tension Releases
1500018
+Bomar Prime PCS Cams Draw Stop
• Creates a Solid Back Wall, Eliminates the "Spongy" Feel
• Great for Archers Using a Back Tension Release
1500012
$24.99 pr.
+Bomar PSE Evolve Draw Stops
• Designed for PSE Bows that Use the Evolve Cam
• Increases Surface Area on Cable Stop to Provide a Solid Back Wall Feel
• Each Stop is Marked for Top and Bottom
(Note: T is Installed on Bottom for LH Archers)
• # 1, 2, & 3 Stop Each Produce a Distinct Let-Off
in 5% Increments Based Off of the High Let-Off
or Low Let-Off Module Installed on an Evolve Cam
• #1 65% on Low Let-Off Mod or 80% on High Let-Off Mod
• #2 70% on Low Let-Off Mod or 85% on High Let-Off Mod
• #3 75% on Low Let-Off Mod or 90% on High Let-Off Mod
• Anodized in Black
1500016
+Bomar Draw Stop
for PSE® Single Cam Bows
• Designed for PSE Hybrid and Single Cam Bows to Provide
a Consistent Hard Draw Stop
• Creates a Solid Back Wall, Eliminates the "Spongy" Feel
• Great for Archers Using a Back Tension Release
1500005
$13.99 ea.
+Lucky Stops Draw Stops
• Lucky Stops Draw Stops Allow You to Easily Dial in
Proper Draw Length, Valley Length, Let-Off, and Wall Feel
• A Great Fitting Bow will Always Give You More Accuracy
• Eliminates Failure Prone Rubber of Factory Draw Stops
• Aluminium Construction
• Made in USA
• Available Models (Includes Stop Sets with 2 Mounting Screws):
BowTech Binary Cams: 2-A4 and 2-B4
Hoyt DFX Cams: 1-AHL, 1-AHT, 1-BHL, 1-BHT
Hoyt ZT Cams: 2-AHL, 1-AHT, 2-BZTL, 1-BHT
3380010 (Bowtech Binary)
3380011 (Hoyt DFX Cams)
3380012 (Hoyt ZT Cams)
+Bomar Hoyt® Draw Stop
• Creates a Solid Back Wall, Eliminates the "Spongy" Feel
• Great for Archers Using a Back Tension Release
• Available Models:
DFX 65% Cams
DFX 75-80% Cams
Spiral X - Fits XTR and Z3 Cams
RKT - Fits Fuel and Z5 Cams
ZT - Fits ZT Cam
1500013 (DFX 65%)
1500011 (DFX 75-80%)
1500015 (ZT)
+Bomar Bear® Draw Stop
• Creates a Solid Back Wall, Eliminates the "Spongy" Feel
• Great for Archers Using a Back Tension Release
• Available Models:
Agenda, Venue, Anarchy, Rumor, Motive, Method, Effect
1500010
+Bomar Binary Cam Draw Stop
• Designed for BowTech Binary Cam Bows
• Creates a Solid Back wall, Eliminates the "Spongy" Feel
• Great for Archers Using a Back Tension Release
• Available Models: 6 mm (Overdrive Cam), 8 mm (Fanatic)
1500014
+Bomar Draw Stop
for PSE® Two Cam Bows
• Designed for PSE Bows with EVO, Mini EVO, UF
and Axe Cams to Provide a Consistent Hard Draw Stop
• Creates a Solid Back Wall, Eliminates the "Spongy" Feel
• Great for Archers Using a Back Tension Release
1500006
1500008 (Spiral X)
1500009 (RKT)
Bowtech Binary Cams
+Lucky Stops PSE Evolve Draw Stops
• Allow you to Easily Dial-in Proper Draw Length, Valley Length, Let-off, and Wall Feel
• A Great Fitting Bow Will Always Give You More Accuracy
• Draw Stops Built Specifically for the Evolve Cam System
• Each Stop will Attach to the Cam Module
• Will Fit PSE Evolve Cams with Removable Stops (SE, EC, ECS)
• Works for the Supra Focus, Perform-X, Evo NXT, Evo NTN,
Evoke, Stealth, Xpedite, & Carbon Air
• Size PF has the Same Settings as the Factory Stops, but will Firm the Wall
• Includes 2 Stops and 2 Mounting Screws
• Aluminum Construction; Black Anodized Finish
• Available Models: PW, PX, PF, PS, PY, PZ
PW: Shortest Stop, Works Best on the Shorter Draw Length Settings
Offers Up 92% Let-Off When Installed on a High Let-Off Module
PX: Slightly Longer and Offers Up 95% Let-Off in the Middle Setting
at Longer Draw Lengths When Installed on a High-Let Off Module
PF: Used Throughout the Entire Draw Length Spectrum and when Set in the
“in” Position it Offers from 95-90% Let-Off Depending on Draw Length
PS: Offers 92-88% Let-Off When Installed in the “in” Position
Slightly Longer Stop Can Decrease Let-Off and Increase Holding Weight
PY: Provides from 88-77% Let-Off Depending on Draw Length Setting,
Increases Holding Weight, and Shortens Draw Length
PZ: Longest Stop Offered for Evolve Cams with the Shortest Draw Length and Lowest Let-Off Settings
• See the Full Chart at www.LancasterArchery.com for More Information
3380015
Model: PF
$32.99 pr.
$17.99 ea.
$26.99 ea.
$34.99 pr.
$39.99 pk.
$39.99 pk.
$59.99 pk.
$27.99 ea.
$27.99 ea.
$42.99 ea.
$16.50 ea.
$14.50 ea.
$27.99 ea.
$27.99 pr.
$23.50 pr.
$21.99 pk.
800-829-7408
STABILIZERS, STRINGS, TOOLS & GUARDS
DRAW STOPS
319
/?q=8790002
/?q=8790003
/?q=8790004
/?q=8790005
/?q=8790006
/?q=8790007
/?q=8790008
/?q=1500018
/?q=1500017
/?q=1500016
/?q=3380010
/?q=3380011
/?q=3380012
/?q=1500005
/?q=1500013
/?q=1500011
/?q=1500015
/?q=1500010
/?q=1500012
/?q=1500014
/?q=1500006
/?q=1500008
/?q=1500009
/?q=3380015
/www.LancasterArchery.com