+ Bitzenburger Fletching Jig
• Die Cast Alloy Construction, All Metal Parts
• Self-Centering Shaft Cradle Will Accept Any Size Shaft
• Large Dials to Adjust Angle of Fletching Offset
• Adjustable Fletch Spacing of:
3 x 120° 4 x 90° 4 x 75° x 105°
• Available Models: Straight Right Helical Left Helical
• Available Clamps: Straight Right Helical Left Helical
• Available Nock Receivers:
Straight Right Helical Left Helical
TM Straight TM Right TM Left
1430002 (Jig w/ Clamp)
1430001 (Clamp Only)
1430004 (Nock Receiver Only)
1430005 (X-Bow Adapter)
+ Bitzenburger Nock Receiver Upgrade Kit
• Replacement body fits directly into your jig and adjusts for all three different fletching patterns
• Includes two inserts which are held into the body by a long screw which is tightened
through the rear of the receiver
- One insert is sized to fit snuggly into any arrow which uses a G nock
- Second insert does arrows which use pin nocks, holding the pin by the
hole in the insert. It also does arrows which use Super nocks
(.246 carbon, Super Uni-bushings, etc.)
- If the pin holder becomes too loose, just gently squeeze the segments
together with a small plier until it holds the pin tightly again
• DOES NOT include a sleeve for X or H nocks
• Adjustable upper support plate is mounted using the template and
hardware included with the kit
• Once the arrow is mounted in the jig, the plate is adjusted to support the upper end of the shaft
7310037
+ Bohning® Complete Arrow Repair Kit
• Get Started Repairing Arrows with One Handy Kit
• Customize and Personalize Your Arrows the Exact Way You Want
• Kit Includes:
- Blazer Helix Fletching Jig
- Strip-Pro for Removing Vanes
- Bohning Instant Gel Glue
- Packet of SSR Shaft Cleaner
- Deluxe Broadhead Wrench with Nock Indexing Tool
- Instructional DVD
1480240
800-829-7408
BOWS, ARROWS, VANES & COMPONENTS
109
FLETCHING JIGS
+ Last Chance Vane Master Pro
• Fletching Jig will Do Any Size Arrow with Little
or No Adjustments
• Helical Adjustment of Up to 5 Degrees
and will Lay Flat Every Time
• Constructed of High Quality Carbonate
• 4 Fletch Knob Attachment (Sold Separately)
Available in 90 degree or 105/75 degrees
6910015 (Jig)
6910023 (4 Fletch Knob)
$89.99 ea.
$31.99 ea.
$15.99 ea.
$19.99 ea.
$34.99 ea.
+ Bohning® Impulse Tower Fletching Jig
• The Tower Provides Easy & Precise 3-Vane Placement 120 Degrees
Apart while Reducing your Fletching Time by 66%
• Accomodates All Size Shafts from X10 to 23/64”
• Includes Clamp Release Tape and 2 Collar Rings
• Specifically Designed Arms for the Thinner Material of the Impulse Vanes
• Standard Post, Pin-Nock Post and F-Nock Post
• The Maximum Vane Size for Fletching Is 4”
1480199
4 Fletch Knob Attachment
(Sold Separately)
+ Bohning® Feather Tower Fletching Jig
• The Tower Provides Easy & Precise 3-Vane Placement 120 Degrees
Apart while Reducing your Fletching Time by 66%
• Accomodates All Size Shafts from X10 to 23/67”
• Includes Clamp Release Tape and 2 Collar Rings
• Includes 2 Sets of Arms; Blue for Right Wing 1 Degree
Helical and Green for Left Wing 1 Degree Helical
• Standard Post, F-Nock Post and Swedged End Post
• The Maximum Feather Size for Fletching Is 5”
1480194
+ Bohning® Tower™ Fletching Jig
• Fletch Three Vanes in One Simple Operation Perfectly 120 Degrees Apart
• 5 Center Post Positions: Std. Carbon, A-Nock, F-Nock, Pin Nock, X-Bow Bolt
• Complete Jigs Fletch: 1° Right Offset Up to 4” Vanes
3° Right Offset Up to 2.25” Vanes
Straight Up to 4” Vanes
• Available Models:
Complete - 3 Sets of Color Coded Arms to Accommodate
3 Fletching Orientations
Helix - 3 Helical Arms Only
1480139 (Complete)
1480167 (Helix)
+ Bohning® Blazer® STR8 Fletching Jig
• Designed for Small Carbon Shafts
• Provides Straight Vane Placement for Vanes up to 2”
• Places 3 Vanes 120° Apart
• Easy Set-up and Simple Operations
1480189
+ Bohning® The Big Jig
• Fletches Up to 4” Vanes with a 1° RH Offset or 3” RH Helical
• Easy Set-up and Simple Operation, Includes 2 Clamps and Instructions
• Fletch Any Size Arrow Shaft Up to a 27/64 Diameter
1480176 (Big Jig)
1480177 (3° RH Helical Clamp)
1480178 (1° RH Offset Clamp)
+ Bohning® 4 Fletch Adapter
• For Use with the Big Jig™ or Blazer® Jig
• Creates a Consistent 4 Fletch Pattern for Increased Accuracy
• Includes Both 90°/90° and 60°/120° Vane Angles
1480270
$64.99 ea.
+ Bohning™ Blazer® Helix Fletching Jig
• Designed for Standard Carbon Shafts, Fletches 2” Vanes
• Fletches Up to 2.25” Vanes with a Perfect 3° Right Helical
• Easy Set-Up and Simple Operation. Instructions Included
• Places 3 Vanes 120° Apart
1480155 (Jig)
1480270 (4 Fletch Adapter)
+ Bohning® Clamp Release Tape
• Apply to Clamps to Prevent Adhesive Build-up
• 1 Pair
1480138
+ Goat Tuff GT Arrow Fletcher
• Compact, Easy to use Fletching Tool Designed with ‘True Contact Design’™
• Shaft and Vane Mate Together Completely, Consistently and Accurately
• The GT Arrow Fletcher comes with:
1 Base with 2 V-Blocks
1 Three fletch indexer
1 Four fletch indexer
2 Lock Down Clips
4 Vane Nests
a. ½ degree Vane Nest for vanes up to 4” long
b. 1 degree Vane Nest for vanes up to 4“ long
c. 2 degree Vane Nest for vanes up to 3.25” long
d. 3 degree Vane Nest for vanes up to 2.25” long
4420017
+ Goat Tuff Crossbow Fletching Jig
• Compact, easy to use fletching tool designed with ‘True Contact Design’™ (TCD)
• Unique design concept ensures the shaft and vane mate together
completely, consistently and accurately every time for a maximum
bond regardless of the helical desired or the shaft size
• Designed to work with most glues, vanes
and arrow shafts however, for optimal
performance, the fast drying
Cyanoacrylate glues such as
those offered by Goat Tuff Products are recommended
• Works on all sizes of crossbow shafts with all different nocks
4420020
$279.99 ea.
$19.99 ea.
$59.99 ea.
$59.99 ea.
$79.99 ea.
$59.99 ea.
$44.99 ea.
$49.99 ea.
$11.99 ea.
$11.99 ea.
$5.99 ea.
$44.99 ea.
$5.99 ea.
$3.50 pr.
$44.95 ea.
$44.95 ea.