RELEASES + X-Spot Target V-Blade Rest
• Micro Adjustable Elevation and Windage
• Adjustable Blade Angle
• Includes .010” 2 Hole Blade
• Accepts 2 Hole SS or Best Launchers
• Available Colors: Black or Silver
&• Specify RH or LH
RESTS 6820002
$49.99 ea.
SIGHTS,Narrow Wide Reduced
$15.99 ea. $15.99 ea.
Arrow Spine Diameter (mm) Diameter (inches) Suggested Blade Size
2314 ect. 9.15 mm 0.360” Wide
2014 ect. 7.95 mm 0.313” Wide/Narrow
1814 ect. 7.15 mm 0.281” Narrow
1616 ect. 6.35 mm 0.250” Narrow
3L-04 750 5.8 mm 0.228” Narrow
ACE 430 5.2 mm 0.205” Narrow/X Narrow
X10 450 5.0 mm 0.197” X Narrow
$17.99 ea.
+ Brite Site Pro Tuner Rest
• Rest Includes 1 - 3/16 Aluminum Spring Steel Launcher
• Available Launcher Sizes: 5/32 Carbon 3/16 Aluminum 1/4 XL
• Available Black Only
• Specify Right or Left Hand
1590006 (Standard Mount)
1590008 (Launcher Only)
1590011 (Rest w/ Hoyt Mount)
1590019 (Rest w/ Verti-Klik)
154
www.LancasterArchery.com TARGET ARROW RESTS / BLADES
+Launchtec Launcher Blade
• Designed to Fit Trophy Taker 1 & 2 Hole Arrow Rests as Well as Spot Hogg
Rests and Others that are Compatible with 1 or 2 Hole Blades
• Made from an Aerospace Quality Epoxy Composite Material
• Less Chatter During Draw
• Quieter than Steel Blades, Will Not Rust
• Does Not Suffer from Fatigue, More
Consistent Performance, Either
Straight or Broken, Never Bent
• Low Bounce, will Settle Quicker,
Hence Better Clearance
• No Sharp Edges which Can
Damage Carbon Arrows
• Available Models: 1 Hole 2 Hole
• Available Sizes: Extra Narrow (Equivalent to .010”)
Narrow (Equivalent to .010”)
Reduced Wide (Equivalent to .010”)
Wide (Equivalent to .012”)
1700003 (1 Hole) 1700004 (2 Hole)
Extra
Narrow
Wide
+Launchtec Hex Launcher Blade
• Designed to Fit AAE Freakshow Arrow Rest as Well as Other
Rests that are Compatible with a Hex Blade
• Made from an Aerospace Quality Epoxy Composite Material
• Less Chatter During Draw
• Quieter than Steel Blades, Will Not Rust
• Does Not Suffer from Fatigue, More Consistent Performance,
Either Straight or Broken, Never Bent
• Low Bounce, will Settle Quicker, Hence Better Clearance
• No Sharp Edges which Can Damage Carbon Arrows
• Available Sizes: Extra Narrow (Equivalent to .010”)
Narrow (Equivalent to .010”)
Wide (Equivalent to .012”)
• Refer to Chart Above for Proper Sizing
1700005
Extra
Narrow
Narrow Wide
Standard Mount
Hoyt Mount
$89.99 ea.
$7.99 ea.
$119.99 ea.
$149.99 ea.
+ Beiter Compound Rest
• Horizontal and Vertical Movement without Loosening or Tightening Any Screw!
• Highest Precision, Rest Allows Precision Adjustments of 0.2mm
• Both Vertical and Horizontal Blocks have Vernier Scales (like a caliper):
Settings can be Reproduced, Resulting in Zero Play
• Launcher Can be Set at Two Different Angles - 30° or 35°
• Guidance Plates: Minimizes Oscillation after the Shot and Changes
the Stiffness of the Launcher
• Note: Does Not Fit Hoyt Carbon Matrix/Element without Slight
Modification to the Mounting Plate
1370131
+ Spot-Hogg Edge Swap Arrow Rest
• The Edge Swap is the FIRST Target Arrow Rest to Include a Quick Detach Feature
• Gives You the Ability to Install, Tune, Remove, and Re-Attach the Rest while
Maintaining Perfect Accuracy and Repeatability
• Swap Feature Gives You the Ability to:
- Easily Store in the Hard Carrying Case for Safer Travel
- Tune Different Arrows to Different Bodies
- Experiment with Tuning by Having One Body Set,
and Another to Experiment with
- Piece of Mind that if a Blade Breaks You Can have
a Separate Body Set Up and Ready to Swap Out
• * A 4-40 Buttonhead Screw Should Be Used with Launchtec
Blades or Damage will Occur Causing the Blade to Fail
• Specify Right or Left Hand
• Available Models:
2 Bodies Includes: (1) Mounting Bar
(2) Rest Bodies
Hard Sided Travel Case
(1) .010” and (1) .008” Launcher Blades
1 Body Includes: (1) Mounting Bar
(1) Rest Body
Hard Sided Travel Case
(1) .010” and (1) .008” Launcher Blades
• Available Mounts: Short Long
1920069 (2 Bodies) 1920068 (Body Only)
1920070 (1 Body) 1920067 (Rest Bar Only)
+ Spot-Hogg Edge Rest
• No-clamp Vertical and Horizontal Micro-adjust with a Single Screw
• Micro Adjustable Blade Angle with Clicks
• Lock Down Launcher to Guarantee Zero Bearing or Bushing Play
• Offers a Self-centering Blade Design for Easy and Exact Position
• M.A.S. - Maximum Arrow Support Technology
• Includes (1) .008 & (1) .010 Narrow Best Launchers
• Specify Right or Left Hand
1920051
+ Spot-Hogg Infinity Swap Arrow Rest
• Infinity is the “Top of The Line” Micro-Adjustable Arrow Rest
• No Clamping Micro-Adjustable Windage and Elevation
• Ease of Use and Precision Adjustments
• Accuracy, Durability, and Dependability
• Spring Loaded Launcher with Adjustable Tension
• Safer Travel by Taking the Rest Off and Storing it Safely
• Different Arrows Out of the Same Bow by Having Different
Bodies Set for Different Arrows
• Experiment with Different Tuning Options
• Peace of Mind for when a Blade Breaks You will the
Swap Ready when You Need it
• * A 4-40 Buttonhead Screw Should Be Used with Launchtec
Blades or Damage will Occur Causing the Blade to Fail
• Available Models:
2 Bodies Includes: (1) .008” and (1) .010” blades
(2) Rest Bodies
Hard Sided Travel Case
1 Body Includes: .008” and .010” blades
(1) Rest Bod
Hard Sided Travel Case
1920077 (2 Bodies) 1920078 (Body Only)
1920076 (1 Body) 1920067 (Bar Only)
+ Spot-Hogg Infinity Rest
• Time-tested Features and Quality Make these Rest Perform
• Spring Loaded Launcher with Adjustable Tension
• Multiple Launcher Options May be Mounted
• 0.010” and 0.008” Dave’s Best Launchers Included
• Vertical and Horizontal Micro-Adjustments
• Specify Right or Left Hand Model
• * A 4-40 Buttonhead Screw Should Be Used with Launchtec
Blades or Damage will Occur Causing the Blade to Fail
• Available in Black Finish Only
2350061
+ Spot-Hogg Premier Rest
• Time-tested Features and Quality Make this Rest Perform
• Spring Loaded Launcher with Adjustable Tension
• Multiple Launcher Options are Included
• 0.010” and 0.008” Best Launcher Blades Included
• Vertical and Horizontal Micro-Adjustments
• Can Be Set Up as a “Prong” or “Blade” Style Rest
• * A 4-40 Buttonhead Screw Should Be Used with Launchtec
Blades or Damage will Occur Causing the Blade to Fail
• Specify Right or Left Hand
2350114 (Black RH) 2350109 (Black LH)
$239.99 ea.
+ Ripcord X-Change Target Arrow Rest
• Extreme and Easy Micro-Adjustability
– Up/Down, Left/Right and Blade Angle!
• Easy to Adjust and Rock-Solid Lock Down
• All Precision-Machined Components
• Includes A .008” Tempered Spring Steel “BEST” Launcher
• Two Interchangeable Arms Included - Long Arm Allows
for Torque Tuning
• Available in RH or LH
3700008
$259.99 ea.
$154.99 ea.
$124.99 ea.
$29.99 ea.
$129.99 ea.
$259.99 ea.
$154.99 ea.
$124.99 ea.
$29.99 ea.
$129.99 ea.
$84.99 ea. $84.99 ea.
$144.95 ea.