COMPONENTS *MTO Includes Easton Pin Nock (2070080) & X10 Pin (2070083) and Fletching. See Page 83 for Additional MTO Options.
&VANES + X-Spot X-10
Tungsten Points
• For Easton X10 & X10 Protour arrow shafts
• Ultra strong tungsten prevents bending
and getting deformed
ARROWS,• Break off sections allow for adjustments
from 120-110-100 grains
2870158
$159.99 ea.
BOWS,68
www.LancasterArchery.com + X10® ProTour Ballistic
Tungsten Break-Off Point
• Tungsten Break-off Point for X10 & X10 ProTour Shafts
• Ultra Strong Point Prevents Bends and Dings
• Break Off Sections from 140-130-120-110-100 grains
2070763
+ X10® ProTour™ Shafts 2070223
+ X10® ProTour™ MTO Arrows* 2070233
• X10 ProTour is the Ultimate Arrow for Long-Range Outdoor Target Use
• Designed for Compound Use
• Low-Profile for Improved Crosswind Performance
• Exclusive Front-Tapered Engineering and Stiffer Tail Section
• High-Strength Carbon Fiber Bonded to a 7075 Alloy Core
• Guaranteed Straightness: ± .0015”
• Weight Tolerance: ± 0.5 grains
• Components Sold Separately
+ Easton® G Pin™ Nock
• Fits all Nock Pins - .098 (Large) 4 gr.
• Available Colors: Orange Blue Red
Green Pink Crystal Lemon/Lime
2070271
X10® ARROWS
X10® COMPONENTS
+ X10® Shafts 2070069
+ X10® MTO Arrows* 2760028
•
X10 is the Ultimate Arrow for Outdoor Target and Olympic-Style Competition
• High-Strength Carbon Fiber Bonded to a 7075 Alloy Core
$14.99 dz.
• Ultra Small Diameter Reduces Wind Drift and Aerodynamic Drag
• Barreled Geometry Minimizes Wind Drift and Increases Long-Range Scores
• Guaranteed Straightness: ± .0015” Weight Tolerance: ± 0.5 grains
• Components Sold Separately +Easton® Pin Nock™
• Fits all Nock Pins
• Available Nock Throat Sizes:
.088 (Small) 2 gr. .098 (Large) 2 gr.
• Available Colors:
Green Red Blue Crystal
Orange Yellow Pink Lemon/Lime
2070080
+ X10® Over Nock
• Fits X10 Only
• Available Sizes/Weights: .088 (Small) 6 gr.
• Available Colors: Green Orange Yellow
2070272
+ X10® Pin
• Fits all X10 Sizes & X10 ProTour 670-770
• Weighs: 8 gr.
2070083
+ X10® ProTour™ Pin
• Fits X10 ProTour 380-620
• Weighs: 8 gr.
2070226 (380-620)
$11.99 dz.
2070083 (670-770)
$11.99 dz.
+ X10® SS Break-Off Point
• Fits X10 and X10 ProTour Shafts (all sizes)
• Available Weights: 80-100 gr. Break-Off Point
100-120 gr. Break-Off Point
2070537 (80-100 gr.)
$37.99 dz.
2070348 (100-120 gr.)
$37.99 dz.
+ X10® Ballistic Tungsten Point
• Fits X10 and X10 ProTour Shafts
• 100-120 gr. Break-Off (all sizes)
• Sold in Dozen Packs Only
2070089
$234.99 dz.
+ Top Hat® Tungsten X10® Points
• Machined from Tungsten to the Highest Standards
• The Tip is Coated with a Specially Formulated Tool Coating
For Enhanced Abrasion Resistance
• Weight Adjustable with Two Break-Off Sections
• Available Weights: 100-120 Break Off 130-150 Break Off
8990027
Lancaster Archery strives to position ads in the product sections to match your ad content but reserves the right to move or drop an ad if space is not available.
+ X10 SS Dimple Points
• Dimples on Surface Breaks the Air Turbulence during Arrow
Flight, Resulting in a Trajectory less Disturbed by the Wind
• Stainless Steel Breakoff Design
• Fits X10 and x10 Protour Shafts
• 90-120 grains
• Outer Tip Length: 1.10 in Insert Length: 2.56 in
9460003
1 Due to the barrel design of the X10, the weight is an average grains-per-inch of a 29” shaft. Shaft weight is slightly heavier in the
larger diameter center and lighter toward the tapered ends. One inch of shaft cut from the point end typically weighs 6-7 grains.
2 Recommended that no more than these lengths be cut from the front of the shaft.
+ Top Hat® X10®
Rear End Protector
• Protective Sleeve for the Rear End of X10 Shafts to Prevent
Splitting or Cracking of the Shaft Upon Impact
• Lipped Design Provides a Square Base for Pin Nock Adapters or Push Nocks
• Machined from Stainless Steel to a Wall Thickness of Approximately .01”
• Weighs Appr. 5 grains
• High Precision Product, Made in Germany
8990034
*MTO Includes G Pin Nock (2070271) & X10 ProTour Pin Nock (2070226/380-620), X10 Pin Nock (2070083/670-770) and Fletching.
See Page 83 for Additional MTO Options.
+ X-Spot X-10
Tungsten Points
• For Easton X10 & X10 Protour arrow shafts
• Ultra strong tungsten prevents bending
and getting deformed
• Break off sections allow for adjustments
from 120-110-100 grains
2870158
+ X10® ProTour Ballistic
Tungsten Break-Off Point
• Tungsten Break-off Point for X10 & X10 ProTour Shafts
• Ultra Strong Point Prevents Bends and Dings
• Break Off Sections from 140-130-120-110-100 grains
2070763
340 8.8 0.340 34 7.0 100-120
+ Top Hat® X10® ProTour
Rear End Protector
• Protective Sleeve for the Rear End of X10 ProTour Shafts to Prevent
Splitting or Cracking of the Shaft Upon Impact
• Lipped Design Provides a Square Base for Pin Nock Adapters or Push Nocks
• Machined from Stainless Steel to a Wall Thickness of Approximately .01”
• Weighs Appr. 5 grains
• High Precision Product, Made in Germany
8990035
o #$422.99 dz.
$474.17 dz.
$422.99 dz.
$474.17 dz.
$14.99 dz.
$5.99 dz.
$11.99 dz.
$149.99 6/pk.
$64.99 dz.
$8.99 dz.
$249.99 dz.
$159.99 ea.
$249.99 dz.
$7.99 dz.