Rear Steer Power Rack and Pinions • All new components – Including valve, piston, seals, bearings and bushings, and pinion and rack gears • Stronger rack shaft – almost 1 inch diameter • More than 6 inches of travel for full turning radius • Sleek, attractive powder coated design • Universal, precision 6061 Aluminum, billet mounting • Lifetime Serviceability The Billet-Power® Rear Steer Rack & Pinion is made of all new components, including the valve and piston, and is designed to fit any classic rear steer vehicle (mounts behind the spindle). Billet mounting "pillow blocks" allow for universal mounting and the pinion shaft rotates to align with your vehicle's steering shafting. Billet finned housing provides heat reduction. ® ® ® Part No. Description FR40020 45” Rear Steer Power Rack FR40020-V 45” Rear Steer Power Rack - with P/S Pump and V-Belt Pulley FR40020-S 45” Rear Steer Power Rack - with P/S Pump and Serpentine Belt Pulley FR40031 41.69” Rear Steer Power Rack FR40031-V 41.69” Rear Steer Power Rack - with P/S Pump and V-Belt Pulley FR40031-S 41.69” Rear Steer Power Rack - with P/S Pump and Serpentine Belt Pulley Part No. Description FR1614 Power Steering Machine Finish FR1614BK Power Steering Black Powder coat FR1614PL Power Steering Polished FR1615 Coolant Overflow FR1616 Brake Fluid Full Turning Radius More Than 6” of Travel Lifetime Serviceability Each system includes a new Power Rack and Pinion, Pump with aluminum pulley (V-Belt or Serpentine) and fittings for connecting hoses to the hose kit of your choice. Hoses, U-Joint, and Reservoir are not included. Aluminum Remote Reservoir Our Remote Reservoirs feature a threaded cap and two machined billet brackets. A sleek radius design will complement any engine compartment. Recommended for use with Flaming River Power Rack Systems, but can also be used with other Stage II Pumps. Machine finish shown 144
FlamingRiver_2017Catalog
To see the actual publication please follow the link above