Rack & Pinions • Rear Steer/Front Steer Front Steer Power Rack and Pinions Unlike OEM Rack and Pinions, where hard lines are set and often cause interference, our Custom Manufacturing allows you to determine where the pressure ports should be located. Dimensionally interchangeable with the Mustang or Omni Racks—with new mounting versatility! Precision-machined billet aluminum mounts retrofit to virtually any vehicle application and feature an adjustable pinion to improve universal joint angle. The Universal Mount Power Rack and Pinion is pressure and fluid tested after assembly to ensure maximum quality and performance. Each Flaming River Power Rack comes with Lifetime Serviceability and is made in the US • All New Components – Including valve, piston, seals, bearings and bushings, and pinion and rack gears • No Core Charge • Stronger Rack Shaft – Almost 1 inch diameter • More than 6” of travel for improved turning radius • Braided stainless pressure lines for low profile design and added clearance • Finned Valve acts as a heat sink for lower fluid temperatures • Billet Pillow Blocks - Allow for adjustable pinion angle • Racks available in 45” and 41.69” overall lengths - Custom designs also available • Made in the USA • Lifetime Serviceability "Pillow Blocks" allow for universal mounting and the pinion shaft rotates to align with your vehicle's steering shafting. Part No. Description FR40022 Front Steer Universal Power Rack - Blue Rack Housing FR40022PLN Front Steer Universal Power Rack - Standard Cast Rack Housing FR40022XX Custom Steer Universal Power Rack - Standard Cast Rack Housing FR40022-V Front Steer Universal Power Rack - with P/S Pump and V-Belt Pulley FR40022-S Front Steer Universal Power Rack - with P/S Pump and Serpentine Belt Pulley Shown with the Rack and Pinion Valve in the standard position with the pressure and return ports facing forward and the pressure lines in the standard position on the front of the tube. Rack and Pinion Pressure Lines on the back of the tube. Rack and Pinion Valve in the standard position with the pressure and return ports facing forward. Rack and Pinion Pressure Lines on the top of the tube. Rack and Pinion Valve reversed allows the pressure and return ports to face the backside of the rack. OEM Style Mounts Lifetime Serviceability Variable Pressure Low-Flow Pump FR1570 See pg 130 145
FlamingRiver_2017Catalog
To see the actual publication please follow the link above