Voltgard® Zip-Strips™ Blanket Straps VBS-14 Voltgard® Zip-Strips™ are the convenient solution for wrapping rubber insulating blankets around energized lines. Durable, wide rubber strap will not damage the blanket, and the hook-and-loop fastener system is easy to position. Standard lengths lengths are 30" for most blanket sizes and 14" for smaller blanket sizes. Sold individually. ITEM # DESCRIPTION UOM PRICE VBS-14 Blanket strap w/ hook/loop fastener, 14" Ea $10.32 VBS-30 Blanket strap w/ hook/loop fastener, 30" Ea 11.14 M36-2 #830 Switchboard Matting Non-conductive switchboard mats are designed to provide insulation for the worker. Made from a PVC compound, the mat prevents the worker from being grounded, thereby eliminating the possibility of electrical shock. The corrugated saw-tooth top surface provides increased traction and is easy to sweep clean. Switchboard mats can be used in dry environments in front of high voltage boxes, electrical fuse boxes, and transformers. Overall thickness: 1/4". Black color. Each square foot is tested in conformance with ANSI/ASTM D-178 specifications and meets or exceeds the following: Type II Compound: Polyvinyl Chloride, Class 2 Dielectric Strength: 30,000 V, Proof test of 20,000 V. Recommended maximum usage of 17,000 V. Priced per square foot. Note: It is highly recommended matting be replaced every 12 months for optimum performance. ITEM # DESCRIPTION SIZES UOM PRICE 830-2/B #830 Switchboard matting 2' W Sqft $10.21 830-3/B #830 Switchboard matting 3' W Sqft 8.76 830-2x75/B #830 Switchboard matting (full roll) 2' x 75' Rl 1,251.79 830-2x75/B #830 Switchboard matting (full roll) 3' x 75' Rl 1,251.79 830 Texture Cross Section Switchboard Matting Switchboard matting is placed permanently in front of switchgear, motor control centers and other high voltage apparatus to provide an additional level of protection for electrical workers. It is also used when tending take-up and pay out reels and when adding or replacing conductors. Made from a black, high quality, Type II material, Class 2 matting is 1/4" (6.4 mm) thick and is tested to 20kV, and Class 4 matting is 1/2" thick and tested to 40kV. Both Classes of matting comply with ASTM D178, Class 2 and Class 4 specifications. The corrugated surface acts as a safety tread while reducing the possibility of metal particles becoming embedded. Class 2 Switchboard matting is available in 25 yard rolls or custom cut to specified lengths, while Class 4 matting is sold in 20 yard rolls only. Several different widths are available. Maximum Use AC Voltage Class 2, 17,000 volts; Class 4, 36,000 volts. Priced per linear yard. ITEM # DESCRIPTION SIZES UOM PRICE M24-2 Class 2 switchboard matting, maximum roll 25 yards 24" W Yd $87.07 M30-2 Class 2 switchboard matting, maximum roll 25 yards 30" W Yd 101.37 M36-2 Class 2 switchboard matting, maximum roll 25 yards 36" W Yd 112.70 M36-4 Class 4 switchboard matting, maximum roll 20 yards 36" W Rl 7,417.96 M48-2 Class 2 switchboard matting, maximum roll 25 yards 48" W Yd 146.59 Electrical Safety • Arc Flash Protection Equipment • Blanket Accessories & Matting 217
Saf-T-Gard Catalog
To see the actual publication please follow the link above