XN-639
14" 80 Duro
XN-637
12" 60 Duro
XN-643
6" 70 Duro XN-641
4" 70 Duro
Aluminum Handle Complete Squeegees
Durable, lightweight and easy to clean aluminum handle. Sharp
edge polyurethane squeegee blade available in 3 durometers.
Bolted for easy blade replacement.
SQUEEGEES
ITEM NO. SIZE DESCRIPTION EACH
4" SQUEEGEES:
AM-669 4" 70 Duro Squeegee (medium - yellow) $7.87
AM-677 4" 80 Duro Squeegee (hard - blue) $7.87
6" SQUEEGEES:
AM-660 6" 60 Duro Squeegee (soft - orange) $11.81
AM-670 6" 70 Duro Squeegee (medium - yellow) $11.81
AM-678 6" 80 Duro Squeegee (hard - green) $11.81
12" SQUEEGEES:
AM-661 12" 60 Duro Squeegee (soft - orange) $23.61
AM-671 12" 70 Duro Squeegee (medium - yellow) $23.61
AM-679 12" 80 Duro Squeegee (hard - green) $23.61
14" SQUEEGEES:
AM-662 14" 60 Duro Squeegee (soft - orange) $27.54
AM-672 14" 70 Duro Squeegee (medium - yellow) $27.54
AM-680 14" 80 Duro Squeegee (hard - green) $27.54
Long lasting &
a great grip!
NEW
NEW
NEW
NEW
FREE FREIGHT ON ALL ORDERS OF $150 OR MORE! WWW.ONESTOPINC.COM
SCREENPRINTING
• SQUEEGEES & HANDLES
73
Wood Handle Complete Squeegees
Polyurethane Squeegee has sharp edge and wide handle for
printing ease. Bolted for easy blade replacement.
ITEM NO. SIZE DESCRIPTION EACH
4" SQUEEGEES:
XN-641 4" 70 Duro Squeegee (medium - yellow) $5.95
XN-642 4" 80 Duro Squeegee (hard - blue) $5.95
6" SQUEEGEES:
XN-643 6" 70 Duro Squeegee (medium - yellow) $8..95
XN-645 6" 80 Duro Squeegee (hard - blue) $8.95
12" SQUEEGEES:
XN-637 12" 60 Duro Squeegee (soft - red/orange) $17.90
XN-635 12" 70 Duro Squeegee (medium - yellow) $17.90
XN-644 12" 80 Duro Squeegee (hard - blue) $17.90
14" SQUEEGEES:
XN-638 14" 60 Duro Squeegee (soft - red/orange) $20.90
XN-636 14" 70 Duro Squeegee (medium - yellow) $20.90
XN-639 14" 80 Duro Squeegee (hard - blue) $20.90
SQUEEGEE HANDLES
Wide wooden squeegee handle. Comes with bolts for easy blade replacement.
ITEM NO. SIZE DESCRIPTION EACH
XN-646 12" Squeegee Handle with bolts $10.45
XN-647 14" Squeegee Handle 14" 12" with bolts $12.20
AM-680
14" 80 Duro
AM-671
12" 70 Duro
AM-660
6" 60 Duro
TIP: INSERTING A SQUEEGEE INTO A HANDLE
Place the squeegee in the handle and drill pilot holes through the squeegee and the handle. Use a smaller bit size and do not drill completely through the
squeegee, use these as a guide only.
After drilling pilot holes, remove the squeegee from the handle and use a drill bit that is slightly larger than the handle holes. The squeegee holes should be
slightly larger than the attaching screw to achieve a secure fit. If the holes are too small when the bolt is inserted, it will cause strain on the squeegee material
which will bulge the print edge. If your handle does not have pre-drilled holes, drill it now with the size required for the screw.
Once the holes are drilled, the squeegee can be placed back in the handle. The bolts should be slowly and evenly tightened. Starting from one side and moving
consecutively down the handle turning each bolt only 1/2 rotation at a time until every bolt has been turned. Repeat this sequence until all the bolts are securely
tightened. DO NOT OVER TIGHTEN THE BOLTS. This will also cause strain on the squeegee material which will bulge the print edge.
/WWW.ONESTOPINC.COM