SHOP TOOLS & SUPPLIES
Features & Benefits
• Anodized aluminum with removable side walls can be scraped mostly clean to save
emulsion, then rinsed fully clean with water to maintain coating edge performance‹
• Manual model includes cover to protect emulsion from dust and light for extended use
FREE FREIGHT ON ALL ORDERS OF $150 OR MORE! WWW.ONESTOPINC.COM
SCREENPRINTING
• EMULSION SCOOP COATERS
69
Saati Magi-Cote™ Scoop Coater
This specially designed anodized-aluminum scoop coater has two different coating
edges. This offers the user more versatility and more control of the stencil thickness.
One edge is sharp for depositing thin emulsion coatings, and the other is thicker
and more rounded for depositing heavier emulsion coatings. The scoop coater is
made of precision-extruded aluminum with a corrosion resistant anodized finish that
makes cleanup easy. The end caps are removable for more convenient and thorough
cleaning. A trough cover snaps on to prevent debris from contaminating the emulsion
for temporary storage as well as added protection
• Aluminum surface will not rust or corrode when used with any emulsion type
• Comes with two edge types for greater control
Scoop Coaters
AW-654
18"
16"
14"
6"
ITEM NO. DESCRIPTION 14" 16" 18"
TI-654 Scoop Coater $25.44 $28.75 $32.06
AWT Emulsion Scoop Coaters
The scoop coater is an easy to handle device that applies a smooth, even and
uniform coat of emulsion from one sharp side to your screen. Made of hard, anodized
gold aluminum. Side enclosures are recessed (1/2"-1") so coating area is slightly
shorter than length of coater. Wash up with water after each use and put protective
strip back on for damage free storage.
ITEM NO. DESCRIPTION 6" 14" 16" 18"
AW-654 Scoop Coater $17.00 $25.25 $26.55 $28.15
Magi-Cote Scoop Coaters
TI-654
TIP: Scoop Coaters are Key to Proper Emulsion Coverage
When choosing a scoop coater choose one with a rounded edge and a thin edge. Use the rounded edge for your initial coats. Sharp edge is
for “face coating” on dry emulsion. The sharp edge will not build up a coating of emulsion through the mesh.
Always do your last coat on the squeegee side to create a “gasket” on the print side of screen to create a better print, and dry screens laying flat
with print side down.
D a v e's Ti p
Magi-Cote Scoop Coaters
TI-654
/WWW.ONESTOPINC.COM