CAPILLARY FILM EMULSIONS
Pre-sensitized emulsion sheets and rolls. Provides consistency of thickness and is easy to apply.
CDF Vision 35
comes in a roll
WATCH PRODUCT
VIDEO ONLINE!
FREE FREIGHT ON ALL ORDERS OF $150 OR MORE! WWW.ONESTOPINC.COM
SCREENPRINTING
• CAPIL L ARY FILM EMULSIONS
47
Ulano CDF Vision 35® Direct-Film System
CDF Vision is a diazo dual-cure capillary film system. Its special formulation controls mesh penetration and enhances photopolymerization,
resulting in sharp printing shoulders and mechanical durability. Particulate-size control reduces granularity effects
for optimal resolution and definition. Texturing agents impart a micro-structural pattern to the bottom of the stencil, minimizing
hydrostatic attraction to the printing stock under conditions of high humidity, and electrostatic attraction under low humidity
conditions. CDF Vision is compatible with UVs, vinyls, and virtually all solvent-based inks.
• Superb acutance (printed edge definition) and resolution
• Solvent resistant
• Compatible with aggressive inks and solvents
• Reclaims easily without staining screen fabric
• Easy stencil inspection and see-through registration
• Easy to Use
• “Pre-coated” stencils = perfect stencils—every time
• Consistent exposure time
• Consistent stencil thickness = control of ink deposits—and ink costs
• Wet processing reduces drying time and pinholes; speeds production
• Fast exposure and processing
• Fast stencil turnaround
• Significantly less labor and production time
• Wide exposure latitude
Thickness: 35 Microns; 70-110 mesh count range
ITEM NO. PRODUCT EACH
UL-604 16X18 Ulano CDF Vision 35 - 16" x 18" 50 Sheets $201.50
UL-604 25X394 Ulano CDF Vision 35 - 25" x 394" Roll $146.00
Ulano EZ-50 Orange
Fast drying, fast exposing pure photopolymer (SBQ) textile capillary film emulsion. EZ-FILM™ is intended for standard textile
printing and is priced to be an economical alternative to direct emulsion in material cost and because it offers significant
savings in labor and production times. EZ-FILM™ is a fast drying, fast exposing SBQ pure photopolymer capillary film
emulsion. Transparent orange for easy inspection and see-through registration. Adheres to 110-150 range mesh with plain
water. Recommended for use with non-aggressive inks such as plastisol and mild, non-solvent based wash-up products.
Aerosol screen openers and aggressive solvents will make screen reclaiming more difficult.
FEATURES BENEFITS
• Easy to use • Minimal training required. Perfect stencils-every time
• Fast processing and exposure • Dries faster than direct emulsion. Fast stencil turnaround
• 94% solids content • Perfect EOM (emulsion over mesh thickness)
• Consistent stencil thickness • Control of ink deposit--and ink costs. Consistent exposure time
• “Pre-coated” stencils • Significantly less labor and production time
• Wet processing • Reduces potential for pinholes. Speeds production
• Transparent orange color • Easy inspection and see-through registration
• Prepackaged film sheets • No mess, no waste. Speeds up application
Thickness: 50 Microns; 86-186 mesh count range
ITEM NO. PRODUCT EACH
UL-642 Ulano EZ-50 Orange - 15" x 17" 50 Sheets $73.66
EZ-50 Orange
comes in flat sheets
MSDS & TECH SHEETS
are available online at
onestopinc.com/catalog/supplies
TIP:
Choose a thinner film with lower microns for higher mesh counts. A thicker film with higher microns is better for lower mesh counts.
Mesh and screens sold on pages 74-77.
D a v e's Ti p
/WWW.ONESTOPINC.COM
/supplies