SBQ PHOTOPOLYMER EMULSIONS
SBQ sensitized emulsions are fully pre-sensitized, premixed and ready to use.
Must be handled under yellow safe light conditions before exposure.
Kiwo PolyCol® One Coat SBQ (Blue)
POLYCOL ONE COAT is a high solid content, very fast exposing, pre-sensitized SBQ “One Pot” emulsion for printing garments
with plastisol, water-based, and discharge inks. This emulsion was specifically developed for screen room efficiency and
processing speed. Coating, drying, and exposing times are significantly reduced to provide printers maximum screen throughput
enabling them to keep up with the demands of a high volume screen shop. The very fast exposing, one year pot life features
also benefit the smaller printer who uses a weaker light source and consumes less than a gallon per month. High resolution
and good mesh bridging combined with its wide exposure latitude make it suitable for fine detail printing. For maximum
durability with discharge and water-based inks PolyCol One Coat should be mixed with Diazo D (supplied at no extra charge).
Solids content: 44%.
ITEM NO. PRODUCT QUART GALLON 5 GALLON
KW-613 Kiwo PolyCol One Coat SBQ $24.75 $74.38 $342.14
Kiwo PolyCol® Multi-Tex SBQ (Blue)
The newest SBQ emulsion from Kiwo is a high solids, fast exposing, pure photopolymer emulsion specially formulated for use with all of the newest
textile inks. Optimized for use on the newest computer-to-screen imagine and LED exposing systems, as well as for all conventional exposure systems.
Time, labor and materials savings means faster turnaround times. Excellent resolution mesh bridging and edge definition. Multi-Tex won’t remove image
from inkjet film positives. Won’t lock-in with solvent cleaners. Use with plastisols including phthalate free and PVC free systems. Also resistant to all
water-base, co-solvent HSAs and discharge inks. Solids content: 43%
ITEM NO. PRODUCT QUART GALLON
KW-616 Kiwo PolyCol Multi-Tex SBQ $20.80 $64.00
Kiwo PolyCol® Crossover SBQ (Red)
Pre-sensitized, plastisol, UV and limited solvent resistant emulsion designed for both textile and sign printers. Provides outstanding resolution, no solvent
lock-in, and extremely easy developing and reclaiming. No mixing, one year pot-life, and exposure speeds three to four times faster than that of dual-cure‘s
make this new emulsion very user friendly. Solids content: 38%.
ITEM NO. PRODUCT QUART GALLON
KW-615 Kiwo PolyCol Crossover SBQ $23.13 $69.27
WARNING:
Fill those pesky pin holes
Emulsions cannot be shipped if
with Blockout Products, page 48
temperature is below 32° F - they
are not freeze/thaw stable.
SUPPLIES GET FREE FREIGHT!
ALL ORDERS* OF $150 OR MORE QUALIFY FOR FREE FREIGHT!
*UPS Zones 2-4 shipping from Grand Rapids, Michigan. See back cover for more details.
One Stop is the Original Place for One Stop Shopping!
44 TOLL EMULSIONS PHOTOPOLYMER SBQ FREE 800-968-7550 Prices listed in this catalog are subject to change with out notice.
WWW.ONESTOPINC.•SCREENPRINTING COM
/WWW.ONESTOPINC.COM