UNISTRETCH PLASTISOL
UNSE
WEB SEARCH: Plastisol and Additive for Printing on Extremely Stretchy Fabrics
Unistretch is perfect for extremely stretchy fabrics, such as Lycra/Spandex or any fabric where an improvement in elasticity is necessary.
Extremely durable and crack resistant, Unistretch increases the elasticity of print. Up to 35% clear can be added to any Union Ink plastisol
series, however best results are achieved when added to Athletic Gloss, Mixopake, or Maxopake series. Clear may also be overprinted on
UNSE 1000
top of flashed colors.
UNSE 9160
Applications
Features
• Extremely stretchy fabrics such as Lycra,
• Increases elasticity of print
Spandex or any fabric where an
• Extremely durable and crack resistant
improvement in elasticity is necessary
Mesh: 110-230 t/in.
Cure: 320° - 330° F entire ink film TIP:
D a v e's Add 7.5-15% Uni-Stretch to a under base and print on top with a
Ti p
PRODUCT INK NO. QUART GALLON
standard plastisol to create a stretch print. Or you can add the same
Unistretch White UI-UNSE 1000 $25.95 NA
percentage to any plastisol to create a stretch print, being careful not
Unistretch Clear UI-UNSE 9160 $20.94 $70.68
to add to much as the ink will thin out quite a bit.
NYLOBOND
• For making plastisols adhere to most waterproofed nylon
NYBE
WEB SEARCH: Additive for Printing on Nylon
• Works best with PATE or PLUE series ink
• Cure temperatures should not exceed 285-300° F
• Over curing is not recommended and may affect adhesion
Plastisol inks do not adhere well to tightly woven, waterproof nylon fabrics like the kind commonly used
• Full adhesion occurs 72 hours after printing
for jackets. Nylobond is the essential ingredient for printing on nylon jackets and other products made
of woven nylon. Add 10-15% Nylobond by weight to any Union Ink plastisol and it will adhere to nylon.
• See data tech sheet for further usage details
Within that percentage range, add slightly more for printing on heavily waterproofed garments or with
high opacity inks. For mixing by volume, add 1 part Nylobond to 5 parts ink. For high opacity inks, add 1
part Nylobond to 4 parts ink.
TIP: STORING NYLOBOND
ITEM NO. SIZE EACH
Store the container upside down so the top of the open product does not skim over
UI-NYBE 91204 4 oz. $10.59
thus loosing product and saving money. Only mix what you will need for the job you
are doing as the ink will harden up after a period of time.
UI-NYBE 91208 8 oz. $15.82
ENDURANCE CLEAR
Additive for Printing on 100% Polyester Fabrics
LBMX
WEB SEARCH: Union Ink‘s press-ready, two-stage non-phthalate system, formulated to provide superior bleed resistance that is necessary for printing on 100% polyester
LBMX9040
performance fabrics. Great for most brands of 100% polyester performance fabrics, stretch fabrics, polypropylene bags, and any materials which may require lower
temperature cure. Features superior bleed resistance with an ultra smooth, soft hand. Results in a satin or semi-gloss finish with superior elasticity and recovery.
Endurance Clear is used as an additive or underbase and has little or no opacity.
Mesh: 86-156 t/in.
Cure: 290-330°F entire ink film.
INK NO. GALLON
UI-LBMX 9040 Endurance Clear $96.21
HI-GLOSS GEL CLEAR PLASTISOL
PLFXE
WEB SEARCH: Gel clear that creates deep, glossy, crystal clear prints.
Features
Applications
• Produces high gloss, crystal clear prints
• Creating a 3D wet-look as an overprint on existing colors
• Retains viscosity, less prone to shearing
PLFXE 9040
• Best results achieved with stencils of 250-400 microns
Mesh: 83 t/in.
• See technical data sheet for details
Cure: 320° F entire ink film
PRODUCT ITEM NO. QUART
Hi-Gloss Gel Clear UI-PLFXE 9040 $27.59
20 TOLL FREE 800-968-7550 Prices listed in this catalog are subject to ADDITIVES PLASTISOL •SCREENPRINTING change with out notice.
WWW.ONESTOPINC.COM
/WWW.ONESTOPINC.COM