• SPECIALTY MATERIALS HTV HEAT TRANSFER & HEAT TR ANSFER Q&A
THERMOFLEX® XTRA
For Nylon, Leather & Other Heat Sensitive Materials
In addition to nylon and leather, ThermoFlex® Xtra will adhere to siliconized materials with
sufficient surface texture for the adhesive to grip, when transferred according to directions. The
new ThermoFlex® Xtra has incorporated the desirable features of our popular ThermoFlex® Plus
including easier handling, cutting and weeding from the addition of its thicker polyester carrier sheet
and low-tack carrier adhesive that enables easy weeding without lifting the cut image from its
carrier. Due to UV Rays, yellowing may occur on the adhesive on the White Xtra, but will not
affect the adhesion.
ThermoFlex®
Xtra
ThermoFlex®
SPORT
White 90
SM-607 15" x 5 Yds
$42.00
THERMOFLEX® SPORT
For Lettering Open-Mesh Athletic Uniforms
ThermoFlex® Sport is a durable thick film material designed for application on polyester mesh and jersey athletic uniforms. You
can heat press ThermoFlex® Sport at a relatively low (300° F - 320° F) temperature and short dwell time (8-10 seconds), which
minimizes dye migration from colored polyester jersey mesh. You can transfer ThermoFlex® Sport to nylon jersey well using the
lowest temperature (300° F) and the shortest dwell time (8 seconds).
Black 36
SM-609 13.75" x 5 Yds
$33.00
Red 40
SM-609 13.75" x 5 Yds
$33.00
Storm Grey GY
SM-609 13.75" x 5 Yds
$33.00
Royal Blue 51
SM-609 13.75" x 5 Yds
$33.00
White 90
SM-609 13.75" x 5 Yds
$33.00
Athletic Yellow AY
SM-609 13.75" x 5 Yds
$33.00
Navy Blue 32
SM-609 13.75" x 5 Yds
$33.00
HEAT TRANSFER Q&A
What is HTV? HTV is short for Heat Transfer Vinyl. It comes with an adhesive backing so it can be applied to a substrate
with a head press.
What is a carrier sheet? A carrier sheet or carrier mask is the original polyester backing on HTV. It is what makes one side of the
material appear glossy. This side of the material always goes face down when cutting and should not be
cut thru during the cutting process. The carrier keeps the HTV design in position so you can place it on a
garment and apply heat. There are two types of carriers. First is a pressure sensitive and second is a static.
Can I layer HTV? Yes. When layering do not press the first layer quite as long as normal. When pressing the final layer press
for the recommended time.
Which side of the material should
face up when being fed into plotter?
D a v e's Ti p
Most materials should be loaded into the cutter so the beginning edge comes over the top of the roll not from the bottom
FREE FREIGHT ON ALL ORDERS OF $150 OR MORE! WWW.ONESTOPINC.COM 129
/WWW.ONESTOPINC.COM