WHAT IS WEEDING?
Weeding is the process of taking a piece of HTV and removing the excess
material inside and around the design using a weeder tool, tweezers or a pin.
D a v e's Ti p
VINYL WEEDING TOOL
Soft rubber grip for comfortable weeding. Sharp, curved tip allows
Make weeding easy!
for easy and precise weeding and picking of even the most intricate designs.
Note: color of weeding tool handle my vary
ITEM NO. DESCRIPTION EACH
depending on manufacterer availability.
SM-614 Vinyl Weeding Tool $13.00
DECOFILM™
Metal Foil Appearance in a Soft, Stretchable Film
DecoFilm™ products give a metal foil appearance. The “Super” styles offer a slightly softer hand,
stretchability and when applied will take on the texture of the garment.
Fabrics: Cotton, Polyester, Fabric blends, Spandex, Lycra, Wool, Linen.
Not for nylon, dazzle cloth, shiny polyester or moisture-wicking materials.
WATCH PRODUCT
VIDEO ONLINE!
Super Silver 45
Super Gold SG
SM-622 19" x 5 Yds
SM-622 19" x 5 Yds
• Add value to your fashion designs with the brilliant
$64.00
$64.00
accent of reflective metals
• The Super colors offer a soft hand and stretchability
• Oeko-Tex Class II Certified
TEXTILE FOILS & HOTMELT BLUE ADHESIVE CARRIER
Create A Beautiful Metallic Finish
Foil transfers can be a valuable asset for any t-shirt designer who wants to create an eye-catching effect! Foils are part of a two-step process that requires laying down an adhesive product first
before adhering - HotMelt Blue.
HotMelt Blue is a cuttable adhesive carrier that must be used to bond Textile Foils to garments. The protective liner has a blue tint, and must be peeled back before plotting and heat pressing.
This material can adhere to cotton, uncoated polyester, cotton/polyester, and polyester/acrylic. No nylon.
WATCH PRODUCT
VIDEO ONLINE!
SM-601
SM-601
NEW
SM-601
SM-603
Silver Gold SI
Bright Silver BS
Rainbow Lines RL
HotMelt Blue
12.5" x 25 Feet $8.00
12.5" x 25 Feet $8.00
12.5" x 25 Feet $12.00
19" x 5 Yards $28.00
Application: Plot your design on the HotMelt Blue adhesive material, reversing the design before cutting. Cut and weed your design. Heat press the HotMelt Blue onto the fabric at 300° F for
5 seconds; peel HotMelt carrier warm, almost hot. Place a piece of Textile Foil that is slightly larger than the design over the HotMelt adhesive, cover; heat set at same temp for 10 seconds.
Rub foil with a cloth and allow to completely cool before stripping the foil sheet. Complete application instructions at onestopinc.com/catalog/supplies/SM603
126 TOLL FREE 800-968-7550 Prices listed in this catalog are subject to change FOILS &V HT MATERIALS Y SPECIALT •TRANSFER
HEAT with out notice. WWW.ONESTOPINC.COM
/SM603
/WWW.ONESTOPINC.COM