• SPECIALTY MATERIALS HEAT TRANSFER THERMO FL EX PLUS HT V
METAL FLAKE COLORS: All Metal Flake Colors are 15" x 5 Yds
Metal flake is embedded for easy wedding and smoother surface
Metal Flake Titanium FT
SM-605 $49.95
Metal Flake Black FS
SM-605 $49.95
Metal Flake Bright Pink FP
SM-605 $49.95
Metal Flake Gold FG
SM-605 $49.95
Metal Flake White MW
SM-605 $49.95
NEON COLORS: All Neon Colors are 15" x 5 Yds *These colors cannot have layers adhered on top of them (they can be layered on top of other colors)
Neon Pink 87*
SM-605 $41.95
Neon Orange 79*
SM-605 $41.95
Neon Yellow 74*
SM-605 $41.95
Neon Deep Orange NO*
SM-605 $41.95
THERMO FLEX® PLUS TRANSLUCENT
FROSTY CLEAR FROSTY CLEAR HTV
Frosty Clear is a thin and transparent UV-resistant polyurethane film that has a
semi-matte finish and resembles screen print. Combine with decorative lines to
add value and pop to your designs. Like the other Plus colors, it is durable, weeds
easily, and has a soft hand and strong grip. The Frosty Clear is manufactured
without the pressure-sensitive carrier for easy stacking. ThermoFlex® PLUS Frosty
Clear will NOT adhere to nylon. Be advised that dye migration has occurred with
low energy dyes in polyester and poly-blend fabrics.
TROUBLE SHOOTING HEAT TRANSFER VINYL
ISSUE: SOLUTION:
Transfer not sticking to the garment Do not press too long or above the suggested tempature.
Translucent Frosty Clear XX
Same is true in not pressing long enough and not up to the suggested tempature.
If HTV still will not stick try letting it cool completely and cold peel.
Apply rubbing alcohol to a cloth and gently rub the area on the garment.
Smooth design back down. Repress for 50% of the original press time.
Peel off the carrier from a different corner when it has reached the specified cure time
HTV is not weeding correctly Usually it has to do with how the material was cut. Before plotting the design, perform
Neon Green 37*
SM-605 $41.95
SM-605 15" x 5 Yds
test cuts and adjust blade depth and speed accordingly.
When doing a test cut, make sure the machine is cutting 90 degree angles in the outer box.
Blade is cutting into the carrier to far Lessen the depth and do another cut
Blade is not cutting deep enough Increase the blade down force and test again
$37.95
D a v e's Ti p
Blade angle is not performing proper cuts A 45 degree blade works on most materials. Recommend using a 60 degree blade for thicker materials
FREE FREIGHT ON ALL ORDERS OF $150 OR MORE! WWW.ONESTOPINC.COM 123
/WWW.ONESTOPINC.COM