HORIZON FALL PREVENTION
Order Today! 1-866-740-2110 • www.horizonhcsonline.com
13
Adjusts to fit most 16" – 28" wide manual
wheelchairs
The Easy On-Off Velcro® Seatbelt Alarm was designed with the
input of caregivers to provide an adjustable and tool-free portable
resident monitoring solution. The belt simply attaches to any standard
wheelchair by sliding the loop ends over the anti-tipper bars at the
rear base of the chair and sliding the belt adjuster against the antitipper
Voice Monitor
VOICE - Caregivers or family members can record a message to
remind the patient to remain in their bed or chair and utilize the call
for assistance button on their side rail or pillow speaker. The Voice
option is very helpful in reminding the patient to wait for assistance.
ALARM MODE - Timed / Normal – The monitor comes from the
factory set to normal. In the normal mode, the reset button is used
to reset the alarm after the alarm is in the process of sounding. The
“Timed” mode allows caregivers to press the reset button before
assisting a patient off of the sensor pad. When the reset button is
pressed, the caregiver has 30-seconds to remove the patient from the
sensor without triggering an alarm. The monitor is then in standby
mode until the patient is placed back on the sensor. The “Timed”
mode allows the caregiver to remove the patient from the sensor
without triggering an alarm or the nurse call system.
• Nurse Call • Volume
• Alarm Delay • Low Battery Indicator
• Alarm Indicator • Strain Relief
bar.
• Adjustable size fits most standard and bariatric residents
• Tool-Free installation
• Mounts to anti-tipper bars
• 71" long
855-107454 Easy On-Off Seatbelt With Advanced Monitor
855-107416 Easy On-Off Seatbelt Only
Mounts to anti-tipper bars
Easy On-Off Velcro® Seatbelt Alarm System
Dimensions: 5”H x 3”W x 1.5”D
Case Material: PVC
Weight w/o Battery: .25 lb
Power: 9 VDC / AC Adapter (Not Included)
ShockAbsorber Material: Silicone
Latex Free
855-108325