Little Switch
FR1002 The Little Switch
FR1002-1 The Little Switch (No Mounting Bracket)
The Little Switch is rated at 100 amps continuous service and 500 amps for 10 second surges
making it ideal for street rods, classics and passenger cars. In addition to preventing battery
drain, this unique switch is also a cost effective anti-theft device. A rubber boot seals the neck
from moisture and dirt.
• Competition approved by IMSA, ARCA, and SCCA.
• Inexpensive Anti-theft Device • Prevents Battery Drain
• Water Resistant • Removable Key
Part No. FR1002
Warranty 1 Year
Voltage 6V/12V/24V
Max Continuous Current 100 Amps
Max Surge Current 500 Amps (10 seconds)
Environmental Protection Rating IP4X
Operating Temperature Range -40°C to +50°C, -40°F to +122°F
Contact Terminals Copper
Contact Hardware Zinc Plated Steel
Stud Diameter M8
Available Stud Length 0.50”
Max Tightening Torque 4.43 ft·lbs / 6 N·m
LED ON/OFF Indicator No
Lock-Out Capability Yes – Removable Key
Replacement Key Part No. FR1002K
FR1050 Dual Battery Disconnect Switch
194
surges
battery
neck
8 7 6 5 4 3 2 1
2.50"
5.58"
2X .28"
1.50"
3.00" .50" 1.50"
D
C
B
A
D
C
B
A
PART NO.
FLAMING RIVER INDUSTRIES
DESCRIPTION
SCALE:
800 POERTNER DRIVE
BEREA, OHIO
44017
SWITCH, KILL BATTERY 100amp (LITLE SWITCH)
SIZE
B
SHEET 3 OF 3
MATERIAL:
PRODUCT CLASS:
MAKE/BUY:
DRAWN BY:
FINISH: DO NOT SCALE DRAWING
FR1002
1:2
REV C/N NO. REVISION DATE BY CK. ENG. ENG.
8 7 6 5 4 3 2 1
FR1002
THIS DOCUMENT AND THE INFORMATION CONTAINED THEREIN IS THE PROPERTY
OF FLAMING RIVER INDUSTRIES AND IS ISSUED IN CONFIDENCE FOR THE
PURPOSE OF AIDING THE TRANSACTION OF BUSINESS BETWEEN FLAMING RIVER
INDUSTRIES AND RECIPIENT. DOCUMENT AND SPECIFICATIONS ARE NOT TO BE
DISCLOSED TO OTHERS, REPRODUCED IN PART OR WHOLE, OR USED FOR
MANUFACTURE FOR OTHERS. DELIVERY OF THIS DOCUMENT BY FLAMING RIVER
INDUSTRIES CONVEYS NO PROPERTY RIGHTS THEREIN NOR IN ANY MATTER
DISCLOSED THEREIN.
ANSI/ASME Y14.5M-1994
UNLESS OTHERWISE SPECIFIED
ALL DIMENSIONS ARE IN INCHES
DWG. NO.
NO SHARP EDGES OR BURRS ALLOWED
TOLERANCES:
DECIMALS:_______ .X=±.1
.XX=±.01
.XXX=±.005
FRACTIONS:__________±1/64
ANGLES:_____________±1°
UNLESS OTHERWISE SPECIFIED
DATE:
= KEY CHARACTERISTIC IDENTIFIER
The Dual Battery Disconnect Switch allows for two
batteries to operate independent of one another, or for
both to be in the ON or OFF position at the same time.
• Rated at 300 Amps continuous service,
and 1000 Amps for 5 second surges.
• 12 or 24 Volts
• IP 54 Rating
• 300 Amps Continuous
• 1000 Amps Surge for 5 Seconds
• Silver Plated Contacts
2.64”
2.64” 3.00”
Mounting Bracket Included Yes
Mounting Bracket Part No. FR1004
Protective Cover Included Yes - Protective Protective Cover Part No. FR1002BT
Approved for IMSA, ARCA and SCCA Competition Use
Rubber Boot
Description Dual Battery Disconnect Switch
Part No. FR1050
Warranty 1 Year
Voltage 12V and 24V
Max Continuous Current 300 Amps
Max Surge Current 1,000 Amps (5 seconds)
Environmental Protection Rating IP54
Operating Temperature Range -40°C to +50°C -40°F to +122°F
Internal Contacts: Silver Plated Copper
Contact Terminals Copper
Contact Hardware Brass
Stud Diameter M10 Available
Stud Length 0.5” (1/2 in)
Tightening Torque 11-13 ft·lbs
Switch Modes 4 Modes: #1 On, #2 On, Both On, Both Off