Rear Steer Power Rack and Pinions • All new components – Including valve, piston, seals,
bearings and bushings, and pinion and rack gears
• Stronger rack shaft – almost 1 inch diameter
• More than 6 inches of travel for full turning radius
• Sleek, attractive powder coated design
• Universal, precision 6061 Aluminum, billet mounting
• Lifetime Serviceability
The Billet-Power® Rear Steer Rack & Pinion is made of
all new components, including the valve and piston, and
is designed to fit any classic rear steer vehicle (mounts
behind the spindle). Billet mounting "pillow blocks" allow
for universal mounting and the pinion shaft rotates
to align with your vehicle's steering shafting. Billet
finned housing provides heat reduction.
®
®
®
Full Turning Radius
More Than 6” of Travel
Lifetime Serviceability
Each system includes a new Power Rack and Pinion, Pump
with aluminum pulley (V-Belt or Serpentine) and fittings for
connecting hoses to the hose kit of your choice. Hoses, U-Joint,
and Reservoir are not included.
Part No. Description
FR40020 45” Rear Steer Power Rack
FR40020-V 45” Rear Steer Power Rack - with P/S Pump
and V-Belt Pulley
FR40020-S 45” Rear Steer Power Rack - with P/S Pump
and Serpentine Belt Pulley
FR40031 41.69” Rear Steer Power Rack
FR40031-V 41.69” Rear Steer Power Rack -
with P/S Pump and V-Belt Pulley
FR40031-S 41.69” Rear Steer Power Rack -
with P/S Pump and Serpentine Belt Pulley
Part No. Description
FR1614 Power Steering Machine Finish
FR1614BK Power Steering Black Powder coat
FR1614PL Power Steering Polished
FR1615 Coolant Overflow
FR1616 Brake Fluid
Aluminum Remote Reservoir
Our Remote Reservoirs feature a threaded
cap and two machined billet brackets. A sleek
radius design will complement any engine
compartment. Recommended for use with
Flaming River Power Rack Systems, but can also
be used with other Stage II Pumps.
Machine finish shown
154