washing
Just add water!
Just add water!
1. Dig a hole the same diameter & depth of plastic basin with the top of the
1. Dig a hole the same diameter & depth of plastic basin with the top of the
2. Place the pump and tubing in bottom of basin and the metal grid on top.
3. Lay the green plastic mesh across top of metal grid to decrease evaporation.
4. Place stone feature on top of metal grid/plastic mesh.
5. Install the plastic tubing through the bottom up to the top of the drilled
STONESTONECREATIONS
basin sitting an inch above ground level and place basin inside.
basin sitting an inch above ground level and place basin inside.
2. Place the pump and tubing in bottom of basin and the metal grid on top.
3. Lay the green plastic mesh across top of metal grid to decrease evaporation.
4. Place stone feature on top of metal grid/plastic mesh.
5. Install the plastic tubing through the bottom up to the top of the drilled
water feature.
6. Add water to the basin until pump is submerged by at least 2” of water and
then plug in the pump.
7. Adjust pump pressure as needed until water is bubbling to desired height.
8. Decorate base of water feature with polished pebbles for a finished look.
Stone
Pebbles
Green Plastic
Mesh
Metal
Grid
Plastic
Tubing
Plastic
Tubing
Pump
Follow these helpful tips for a worry-free fountain installation.
Check out our
fountain set up
videos on Youtube!
AgeCREATIONS
StoneAgeCreations.com | 419.929.2240
water feature.
6. Add water to the basin until pump is submerged by at least 2” of water and
then plug in the pump.
7. Adjust pump pressure as needed until water is bubbling to desired height.
8. Decorate base of water feature with polished pebbles for a finished look.
Stone
Pebbles
Green Plastic
Mesh
Metal
Grid
Plastic
Tubing
Plastic
Tubing
Pump
Follow these helpful tips for a worry-free fountain installation.
Check out our
fountain set up
videos on Youtube!
StoneAgeCreations.com | 419.929.2240
/StoneAgeCreations.com