SQUEEGEE BLADES
Plei-Tech squeegee blades by Pleiger are made of high quality polyurethane that can withstand swelling from aggressive inks and remain durable
when printing on a multitude of substrates.
Size: all are .375" thick, 2" tall and available in different lengths 4" -14" and now 72" rolls. 144" rolls are available by special order.
Square Edge-Single 70A Durometer (SE-S) - Yellow
SE-S
Pleiger’s most common squeegee profile, 70A Durometer squeegee is used in a wide variety of printing applications on many different substrates. The
Square Edge-Single
most popular squeegee for textile printing for both manual and automatic presses. Plei-Tech 22 polyurethanes perform well using plastisol, waterbase
70A Durometer
and less aggressive UV and solvent based ink that have a lesser effect on squeegees.
Available in
ITEM NO. SIZE DESCRIPTION EACH
4", 6",
12", 14"
Square Edge Single Durometer Squeegee Blade (SE-S)
& 72"
PE-641 4" 70 Duro (medium - yellow) $3.64
lengths
PE-643 6" 70 Duro (medium - yellow) $5.46
PE-635 12" 70 Duro (medium - yellow) $10.90
PE-636 14" 70 Duro (medium - yellow) $13.08
ROLLS AVAILABLE!
PE-637 72" roll 70 Duro (medium - yellow) $58.88
Square Edge-Single 70A Durometer -
PE-638 144" roll 70 Duro (medium - yellow) Special Order $117.76
cut down to the size you need!
SE-T
Square Edge-Triple
70/90/70A Durometers
Square Edge-Triple 70/90/70A Durometer (SE-T) - Yellow-Blue-Yellow
Available in
Pleiger’s 90A Durometer center provides maximum support for the two softer print edges. This is an exceptional tool for printing on high mesh
12" & 14"
counts with elevated screen tensions. This Plei-Tech 22 polyurethane profile excels in printing four-color process work or half-tone jobs on automatic
lengths
presses.
ITEM NO. SIZE DESCRIPTION EACH
Square Edge Triple Durometer Squeegee Blade (SE-T)
PE-646 12" 70/90/70 Duro (med/hard/med) $20.18
PE-647 14" 70/90/70 Duro (med/hard/med) $24.20
Single Durometer Pit-Stop Pack
1
This squeegee pack is a time saving solution to prepping and cutting squeegees for the press.
The Pit-Stop Pack includes 10 ready to install SE-S 70 durometer (yellow) squeegees, cut to 14"
lengths with radii on the ends.
SQUE EGE E
ITEM NO. SIZE DESCRIPTION EACH
Square Edge Single Durometer Squeegee PIT-STOP PACK (10 pieces)
PACK
PE-648 14" 10 pack of 70 Duro (medium - yellow) $99.98
SQUEEGEE DUROMETER SELECTION GUIDE
Durometer (Duro) is the measurement of hardness/softness of squeegee blade.
60 Duro SOFT Flexes more thus pushing more ink through lower mesh counts. Printing on fleece, athletic garments, thicker ink deposits
70 Duro MEDIUM Great for general purpose textile printing
80 Duro HARD Blade sheers ink off at stencil. Higher mesh counts for more detailed printing like process, jacket or sign graphics and thinner ink deposits
TIP: RESHARPENING SQUEEGEE BLADES
Squeegee blades can be resharpened with either a belt sander, grinding wheel, diamond wheel, hot knife, cold cutting blade, or rotating blade. To
achieve best results, squeegees should always be dry and free of solvents for at least eight hours prior to attempting to sharpen or grind.
D a v e's Ti p
When grinding, the best sharpening results are achieved by removing 0.005" using 180 grit. After 3 to 5 passes, advance the wheel 0.005" and repeat.
Continue this process until the desired edge is obtained.
66 TOLL FREE 800-968-7550 Prices listed in this catalog are subject to change with out notice.
BLADES SQUEEGEE WWW.ONESTOPINC. •COM SCREENPRINTING
/WWW.ONESTOPINC.com