• SPECIALTY HEAT PRESS MATERIALS HT V White 90
THERMOFLEX® XTRA
For Nylon, Leather & Other Heat Sensitive Materials
In addition to nylon and leather, ThermoFlex® Xtra will adhere to siliconized materials with sufficient surface texture for the
adhesive to grip, when transferred according to directions. The new ThermoFlex® Xtra has incorporated the desirable features of our
popular ThermoFlex® Plus including easier handling, cutting and weeding from the addition of its thicker polyester carrier sheet and low-tack
carrier adhesive that enables easy weeding without lifting the cut image from its carrier. *Antique Silver cannot be layered under
other colors. Due to UV Rays, yellowing may occur on the adhesive on the White Xtra, but will not affect the adhesion.
SM-607 15" x 5 Yds
$44.95
Black 36
SM-607 15" x 5 Yds
$44.95
ThermoFlex®
Xtra
ThermoFlex
®
SPORT
Red 40
SM-607 15" x 5 Yds
$44.95
Athletic Yellow AY
SM-607 15" x 5 Yds
$39.56
Navy Blue 32
SM-607 15" x 5 Yds
Royal Blue 51
SM-607 15" x 5 Yds
$39.56
Antique Silver AS
SM-607 15" x 5 Yds
$44.95
$44.95
THERMOFLEX® SPORT
For Lettering Open-Mesh Athletic Uniforms
ThermoFlex® Sport is a durable thick film material designed for application on polyester mesh and jersey athletic uniforms. You can
heat press ThermoFlex® Sport at a relatively low (300° F - 320° F) temperature and short dwell time (8-10 seconds), which minimizes
dye migration from colored polyester jersey mesh. You can transfer ThermoFlex® Sport to nylon jersey well using the lowest
temperature (300° F) and the shortest dwell time (8 seconds).
Red 40
SM-609 13.75" x 5 Yds
$33.00
Athletic Yellow AY
SM-609 13.75" x 5 Yds
White 90
$33.00
SM-609 13.75" x 5 Yds
$33.00
Royal Blue 51
SM-609 13.75" x 5 Yds
Navy Blue 32
SM-609 13.75" x 5 Yds
Storm Grey GY
$33.00
$33.00
SM-609 13.75" x 5 Yds
$33.00
Black 36
SM-609 13.75" x 5 Yds
$33.00
HEAT TRANSFER Q&A
What is a carrier sheet? A carrier sheet or carrier mask is the original polyester backing on HTV. It is what makes one side of the
material appear glossy. This side of the material always goes face down when cutting and should not be
cut thru during the cutting process. The carrier keeps the HTV design in position so you can place it on a
garment and apply heat. There are two types of carriers. First is a pressure sensitive and second is a static.
Can I layer HTV? Yes. When layering do not press the first layer quite as long as normal. When pressing the final layer press
for the recommended time.
Which side of the material should
face up when being fed into plotter?
D a v e's Ti p
Most materials should be loaded into the cutter so the beginning edge comes over the top of the roll not from the bottom
FREE FREIGHT ON ALL ORDERS OF $150 OR MORE! WWW.ONESTOPINC.COM 117
/WWW.ONESTOPINC.COM